Shipping throughout Russia and to other countries

Archival equipment E'leksir IP-106, IP-109, IP-114, etc

Stationary equipmentIP-106 - shaft curvature meter

The shaft curvature meter is designed for remote monitoring of the shaft curvature on the shaft rotation and the battle of the shaft at revolutions by the eddy current method, output of information to the indicator of the device in digital form, conversion of the measured value into a unified DC signal, signaling and generation of the equipment shutdown signal when the set limit value is reached.

It is used for all types of turbines or similar equipment.

The device is designed for non-contact measurement of the maximum peak value of the relative vibration displacement of the shaft neck of the rotor of steam turbines or other equipment in two mutually perpendicular directions, output of information to the indicator of the device in digital form, conversion of the measured value into a unified DC signal, signaling and generation of the equipment shutdown signal when the specified limit value is reached.

It is used for all types of turbines or similar equipment.

The tachometer is designed for non-contact measurement of the rotational speed of the turbine shaft made of chromium-nickel ferromagnetic steels with digital indication, conversion of the rotational speed into a unified DC signal and signaling when a set value is reached.

The tachometer outputs a turbine stop signal, has a mode for storing the maximum speed and a mode for measuring the sensor gap relative to the turbine shaft, has a setpoint for lowering the speed and a fast setpoint. It is used for all types of turbines or similar equipment.

The device is designed to measure the RMS value of the vibration velocity of the bearings of turbine units or other equipment in three directions, output information to the indicator of the device in digital form, convert the vibration velocity into a unified DC signal, alarm when the set value of vibration velocity is reached, jump alarm.

It is used for all types of turbines or similar equipment.

The IP-121 device is also available in explosion-proof design.

The remote display unit is used to control the rotation of the rotor of the unit and is installed directly next to the object of control.

The measured parameter is the rotation speed.

Converter for devices:

  • Tachometer IP-114.

IP-114. Technical descriptionConverter IP-121

The measured parameter is the vibration velocity of the bearings.

Converter for devices:

  • Absolute vibration meter IP-121.
  • Absolute vibration meter IP-120.

IP-121. Technical descriptionIP-114 sensor

Sensors can be equipped with devices:

  • The curvature meter of the shaft IP-106.
  • Tachometer IP-114.
  • Speed meter (tachometer) IP-115.
  • The curvature meter of the shaft IP-119.

IP-114. Technical descriptionIP-121 sensor

Sensors can be equipped with devices:

  • Vibration meter IP-121.
  • Vibration meter IP-120.

IP-121. Technical descriptionPortable equipment

VSV-131 - portable vibration stand

The stand is designed for verification and calibration of piezo sensors of the equipment "ACTIVE", devices IP-120, IP-121 and similar.

Designed for vibration diagnostics and balancing of turbines, generators, electric motors and other main and auxiliary equipment of power plants, as well as diagnostics of mechanisms at other industrial facilities.

Questionnaire for Elixir devices

All E'leksir products

The group "New Technologies" offers for review the products of the plant E'leksir: mechanical quantity meters, display units, spark protection units, sensors, converters, portable balancing equipment
  • Control units E'leksir
    Control units
    Asset, SKIV, IP-115, IP-117, etc.
  • Display units E'leksir
    Display units
    VBI-115, etc.
  • Spark protection units E'leksir
    Spark protection units
    BIS et al.
  • Converters E'leksir
    Converters
    IP-106, IP-107, IP-108, IP-109, etc.
  • Sensors E'leksir
    Sensors
    VLI, IP-106, IP-107, IP-108, etc.
  • Management system E'leksir
    Management system
    Citect SCADA et al.
  • Archival equipment E'leksir
    Archival equipment
    IP-106, IP-109, IP-114, etc

About E'leksir

In July 1988, the research and production company ELIXIR was established. During its operation, there was practically no power plant left, where the devices produced by the enterprise, produced as part of the ASSET equipment, and portable balancing equipment were not operated in one or another volume.

  • application

    The high reliability of the devices, ease of operation and repair, and numerous requests from power plants to switch to Elixir devices, forced almost all manufacturers of turbines and turbo-feed pumps to switch to installing Elixir devices on all new machines.

  • technologies

    The devices manufactured at the enterprise are designed using modern digital technologies and MicroChip programmable controllers, which made it possible to reduce the weight, overall dimensions, power consumption, increase measurement accuracy and reliability.

  • TERMS OF ORDER EXECUTION

    To ensure the order in the shortest possible time, all items of manufactured equipment are available in stock in the warehouse, thus ensuring a minimum shipment time of three working days. In some cases, the delivery time may be reduced to two days.

Information Board E'leksir

Learn more about our products E'leksir.
  • Price list for products of the plant E'leksir
    Price list for products
  • Questionnaire for Elixir devices бренда Элексир
    Questionnaire for Elixir devices

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: